WELLUN WELLUN machine

CN

繁体版

简体中文

News information

Gather industry real-time dynamics, release the latest information of Hualun machinery

Home > News > Product information
How to operate automatic drilling machine well

Before the technical staff of our company gave you a simple popularization of the automatic drilling machine how to solve the problem of large machining workpiece tolerances, today our technical staff then discuss the need to pay attention to the process

312022-12 Dongguan hinge drilling machine use precautions

In order to protect the hinged drilling machine equipment and achieve the best working effect when using the hinged drilling machine, we should pay attention to some usage instructions. The first is to choose the right bit or drill nozzle according to the

312022-12 Influence of gas pressure on cutting quality of CNC cutting saw

If the user set the CNC cutting saw gas pressure is too low, then the ion arc of the CNC plasma cutting saw will be spewed out at work, and then the input air flow will be less than the specified value, which will cause the formation of high energy, high

312022-12 Dongguan row drill manufacturers brief analysis of the correct use of woodworking row drill

With the width of the drawer on both sides of the plate as the size benchmark, left and right custom sub-; The two thick skins of the side panels are together and placed in the middle position, and the left and right sides of the drawer panel are increase

312022-12
Dongguan automatic edge sealing machine installation steps
Dongguan automatic edge sealing machine installation steps

Before installation, check whether the ground is strong and flat, it is best to install the machine on the concrete surface to ensure the stability of the machine after adjustment, and require the installation site light is not less than 500LUX, and ensur

2022-12-31
Dongguan CNC cutting board saw operation of the four major preparation and boot preparation
Dongguan CNC cutting board saw operation of the four major preparation and boot preparation

First of all, clean up the machine and the working place; Secondly, check whether the suction system is normal; Then check whether the saw blade is sharp; Whether the size saw blade is in a straight line; Test the machine for about one minute to see if th

2022-12-31